Detalhes da empresa

  • Changzhou Ruide Drying Engineering Technology Co., Ltd

  •  [Jiangsu,China]
  • Tipo de Negócio:Fabricante
  • Main Mark: Americas , Ásia , Europa , Norte da Europa , Outros Mercados , Europa Ocidental
  • Exportador:71% - 80%
  • certs:ISO9001
  • Descrição:Fabricantes do sistema de transporte pneumático da fase diluída feitos sob encomenda,Sistemas de transporte pneumático de fase diluída,Sistema de transporte pneumático da fase diluída feita sob encomenda dos fabricantes
Cesta de Consulta (0)

Changzhou Ruide Drying Engineering Technology Co., Ltd

Fabricantes do sistema de transporte pneumático da fase diluída feitos sob encomenda

,Sistemas de transporte pneumático de fase diluída,Sistema de transporte pneumático da fase diluída feita sob encomenda dos fabricantes

Casa > Lista de Produto > Sistema de transporte pneumático > Sistema de transporte pneumático de fase diluída > Fabricantes de sistemas de transporte pneumático de fase diluída personalizados
Grupo de Produto
Serviço on-line

Fabricantes de sistemas de transporte pneumático de fase diluída personalizados

Compartilhar no:  
    Preço unitário: USD 26500 - 7500 / Set/Sets
    Incoterm: FOB
    Quantidade de pedido mínimo: 1 Set/Sets
    Tempo de entrega: 30 dias

Informação básica

Modelo: Dilute phase pneumatic conveying system

Additional Info

Pacote: Caixa de madeira

produtividade: 15sets

marca: Ruide

transporte: Ocean

Lugar de origem: China

Habilidade da fonte: 2Sets/Month

Certificados : ISO9001

Descrição do produto

Product range: Dense Phase Systems

Product category: Pneumatic Conveying Series

Product introduction:

It can be with two ways: tank transmission and rotary valve transmission. The former is through compressing the tank to a stated pressure,switching the discharging valve and air knife to distribute materials( they are in the state of a plunger to realize the whole process of transmission. Speed of airflow transmission is much lower, yet fixing this kind of airflow is much higher. Besides, transmitting barometric pressure is also higher. Air or nitrogen is usually used for transmitting with compressor providing power. Its main characteristics are low transmission speed and little influence against quality of material. Rotary valve pneumatic hyperflow is in the way of Dilute Phase positive pressure to transmitting with compressor providing power. This system has much higher pressure, much lower speed of flow, but much heavier transmitting capacity with little influence again materials.

 conveying system

Pneumatic Hyperflow system usually has the following combination:

 

1. Solid-state Dense Phase

It is usually used for single-point feeding materials, long-distance transmission with the materials being fragile and abrasive. It is almost full of materials in type of plunger flow moving forward in the tubing, which is in a low speed and high density way to transmitting materials in the tubing.

 

2. Discontinuous Dense Phase

It is usually used for single-point feeding materials and much longer-distance transmission. It is almost full of materials in type of plunger flow moving forward in the tubing. Those materials have little abrasiveness to the tubing and are invulnerable to breakage. And they are usually transmitted by positive pressure.

 

Positive transmitting system is an energy-saving with high efficiency transmitting way to transmit materials to a long distance by compressed air.

 

Its air supply is compressor air motor.

 conveying system

According to different transmitting materials and layout forms, it is necessary to calculate pneumatic transmission seriously and rigidly.

 

There are several different transmission ways for positive pressure system as follows:

 

1). In the way of Feeding through Star-rotary valve, transmit materials in the tubing into store holder

2) In the way of Feeding through rotary valve, transmit materials in the tubing into store holder.

 

3). combined negative pressure/ positive pressure transmitting system is through negative pressure driving the near multipoint materials into the aggregate bin, and the bin pump set below the aggregate bin transmitting materials into store holder or other receiving points.

 

3. Continuous dense phase

It is the way of Multipoint feeding and single-point discharging. Materials Transmission speed in the tubing is lower than that of suspended state which is suitable for transmitting powder and little granule.




Grupo de Produto : Sistema de transporte pneumático > Sistema de transporte pneumático de fase diluída

imagem de Produto
  • Fabricantes de sistemas de transporte pneumático de fase diluída personalizados
  • Fabricantes de sistemas de transporte pneumático de fase diluída personalizados
  • Fabricantes de sistemas de transporte pneumático de fase diluída personalizados
Enviar e-mail para este fornecedor
  • *Assunto:
  • *Mensagens:
    Sua mensagem deve estar entre 20-8000 caracteres
Comunique-se com o fornecedor?fornecedor
Denis Mr. Denis
O que posso fazer por você?
conversar Agora Fornecedor